VisionMount Adapters
VisionMount adapters and accessories adjust, expand and support wall mounts and AV components to adapt to virtually any size flat-panel TV or center channel speaker.
MA1A-VESA 400mm x 200mm & 300mm x 200mm Adapter
for MEDIUM flat-panel mounts
Vesa 400 x 200 adaptor plate for medium sized flat panel TV mounts. Suits (VM400, MF110, VM300 and VM200). Now also supports 300 x 200 VESAAvailable in Black only
Click for larger image.
VMB1-Adapter Bracket for 61
for VMPL and VMPL2 wall-mounts
VisionMount VMB1 extra-large plasma TV adapter bracket for Sanus VMPL and VMPL2 flat-panel TV wall mounts. This adapter allows Sanus VMPL and VMPL2 flat-panel TV wall mounts to support the unique mounting patterns of some extra-largeTVs, such as the 154.94 (61") NEC and other plasma TVs.Available in Black only
Click for larger image.
VMCA1-Concrete Ceiling Adapter
for ceiling mounts
Concrete ceiling adaptor, VMCA1B-01 5" ceiling plate is a cost effective solution for simple installations. Easy to install and so versatile it can hold equipment using all 4 holes or 2 opposing holes. The 4" x 4" mounting pattern is designed to allow use of 3/8" mounting bolts. Includes set screw to secure 1 1/2" NPT to ceiling plate. Weight Capacity: 227kg. Not to be used in wood slides Available in Black only
Click for larger image.
VMCA2-I-Beam Adapter
for ceiling mounts
I-Beam adaptor, VMCA2B-01 adapts 1 1/2" threaded extension column to square, round, rectangular, or I-beam truss up to 3" in diameter. Weight capacity: 113.6kg.Available in Black only
Click for larger image.
VMCA3-Unistrut Adapter
for ceiling mounts
Unistrut adaptor, VMCA3B-01 offset unistrut adaptor makes installation to all styles of 1 5/8" Unistrut / U-Channel simple. Designed with a 1 1/2" cable management gap, it offers the ability to run cable up through the pole and directly out of the unistrut adaptor. Installation is quick and it ships with spring nuts and bolts for attaching to Unistrut / U-Channel. Weight Capacity: 227.3 kgAvailable in Black only
Click for larger image.
VMCA4-Dual-Joist Adapter
for ceiling mounts
Dual - Joist Adaptor, VMCA4B-01 16" on centre ceiling plate can be attached to finished ceiling using the included lag bolts (16" on-centre joists use the CMA-390, 24" on-centre joists use the CMA-391). The CMA-390 can also be used on structural ceilings using concrete anchors (CMA-380). Unit has threaded fitting to accept 1 1/2" NPT threaded extension column. Set screw is included. Weight capacity: 136.4kg.Available in Black only
Click for larger image.
VMCA5-Vaulted Ceiling Adapter
for ceiling mounts
Vaulted ceiling adaptor, VMCA5B-01 angled ceiling adaptor adjusts from -5 degrees to +95 degrees to level an angled ceiling. Accepts 1 1/2" NPT threaded extension column. Three slotted mounting holes allow horizontal and vertical adjustment for a precise installation. Includes set screw. Dimensions: 4 1/4" H x 3" W x 7 1/2" L 107.9mm H x 76.2mm W x 190.5mm L. Weight capacity: 227.3kg.Available in Black only
Click for larger image.
VMCA6-NPT Column Adapter
for ceiling mounts
NPT column adaptor, VMCA6S-01 1" - 1 1/2" NPT Adaptor/Reducer. Easily adapt your RPA Mount or other 1 1/2" NPT accessory for use with a NPT column. Available in Silver only
Click for larger image.
VMCA7-8" x 8" Ceiling Plate Adapter
for ceiling mounts
Ceiling adaptor plate 8" x 8" - 1 1/2" NPT fitting. It combines with an extension column or our adjustable extension column, allowing you to size your installation. Includes set screw. Also available for attaching to 2" NPT column. Weight capacity: 227.3kg.Available in Black only
Click for larger image.
VMCA8-6" x 6" Ceiling Plate Adapter
for ceiling mounts
Ceiling adaptor plate 6" x 6" - 1 1/2" NPT fitting. It combines with an extension column or our adjustable extension column, allowing you to customise your installation. Includes set screw. Also available for attaching to 2" NPT column. Weight capacity: 227.3kg.Available in Black only
Click for larger image.
VMCA9-Offset Fixed Ceiling Plate Adapter
for ceiling mounts
Offset fixed ceiling plate use with 1 1/2" NPT it allows projector cables to be routed through the extension column and out the top of the ceiling plate for cable management. 8" square ceiling plate with 1 3/4" high offset. Overall height is 4 1/2". Attaches to 1 1/2" NPT threaded extension column. Also available for attaching to 2" NPT Column. Weight capacity: 227.3kg.Available in Black only
Click for larger image.
VMCA10-2' to 3' Adjustable Extension Column
for ceiling mounts
Adjustable extension columns can be used with any 1 1/2" NPT accessory to lower projector to desired height. Provides range of height adjustment in approx 2.5cm increments depending on model. Includes set screw for added rigidity. Minimum length 60.96 - 91.44cm. Weight capacity: 227.3kg. Available in Black only
Click for larger image.
VMPA2632-Panasonic Adapter
For use with VM200, VM300, VM400
The VisionMount VMpa2632 is an adapter that allows Sanus VM200, VM300 and VM400 flat-panel TV wall mounts to be used with Panasonic TC-26LX20, TC-26LX50, TC-32LX20 and TC-32LX50 TVs. Available in Black only
Click for larger image.
VMXA1-Adapter for VMPL3
Available in Silver
Click for larger image.
VM100/200-VESA 100mm x 200mm Adapter
for mounts with 100mm x 100mm VESA pattern
Adaptor plate for VMF, VM1, VM2, and VM3. VESA 100 to 200 mm. Available in Silver only
Click for larger image.